===== Project Introduction =====

Here's your chance to fulfill your parts supply fantasies. My company is buying a CNC router that can fabricate parts in wood, metal and plastics. This means I will have the ability to fabricate replacement parts for Naka-decks and other gear.

So start making  a wish list, and let's figure out what kind of spare parts I can make,

My new CNC router has a digitizer and also uses Vectris software. So, I can digitize and replicate existing parts or use 3D CAD files.

Kermit Gray







===== Wish List =====

^ Description ^ Part number  ^
| Azimuth/zenith adjusting plastic gears/screws |  |
| Plastic retainer screw for pinch rollers|  |
| Tape Pad Lifter |  |
| Nakgauges |  |
| 680 series rack mounts |  |
| 680 series selection knobs (right panel) |  |
| HighComII rack mounts |  |
| NR-200 rack mounts |  |
| ZX-7/9 calibration knob covers |  |
| RX-202 clear tape window |  |
| Dragon Small Bias Knobs |  |
| 700ZXL Transport Knobs |  |